Profile Frames in Gunmetal

Frames as shown: (top) 5x7 (two), 8x10, 5x7, 8x8; (bottom) 11x11, 8x10, 11x14, 5x7.

1

Size

11x14 Frame

20"w 1"d 24"h
$99.00

11x11 Frame

20"w 1"d 20"h
$89.00

8x10 Frame

16"w 1"d 20"h
$79.00

8x8 Frame

16"w 1"d 16"h
$69.00

5x7 Frame

12"w 1"d 16"h
$59.00
Made In
Product Details

Our exclusive Profile frames are made in Ohio by a family-run company that’s been in business for 40 years. These sturdy aluminum frames feature beautifully mitered corners, a durable finish and a clean, white mat for a classic, gallery-worthy appearance. Plus, the glass in every frame is washed twice before packing, so you can simply insert your image and enjoy.

  • Frame Width: .5"w
  • Features: hangs horizontal or vertical
  • Includes: white gallery-quality mat
  • Wall Mounting: mounting bracket
  • Glazing Material: glass
  • Product Origin: made in Ohio
  • Item Numbers:
    322148
    11x14 Frame (20"w 1"d 24"h)
    926181
    11x11 Frame (20"w 1"d 20"h)
    185490
    8x10 Frame (16"w 1"d 20"h)
    652854
    8x8 Frame (16"w 1"d 16"h)
    055012
    5x7 Frame (12"w 1"d 16"h)
  • Material: aluminum
  • Finish: lacquer
  • Color: gunmetal
Installation

List of parts

  • Profile Frame in Gold, Gunmetal or Silver

Tools needed

  • flat blade screwdriver
  • hammer
  • common nail

Directions

  1. Place the frame face down on a soft, flat, protected surface.
  2. Use your fingers to press down on the curved metal spacers and remove each one from the frame. (Figure 1)
  3. Using the screwdriver, loosen the screws of two L-shaped corner brackets at the top (short side) of the frame. (Figure 1)
  4. Carefully remove the top section of the frame. Note: Exposed metal corners may be sharp.
  5. Slide the back board from the frame.
  6. Position your image in the mat window opening. Optional: Secure image with tape to keep it from shifting.
  7. Insert the backing board into the frame.
  8. Reattach the top portion of the frame by aligning the corners and gently tightening the L-shaped corner brackets with a screw driver. Note: Excessive tightening may break the glass.
  9. Place the curved metal spacers back under the edges of the frame by pressing each one down and tucking it into position.
  10. Hammer the nail 3/4 of the way into desired wall location and hang frame so it's flush against the wall.
Reviews (29)