Agenda Magnetic Board Installation Instructions
List of parts:
- 18w 24h or 36w 28h Agenda Magnetic Board
- wall anchors
- #2 Phillips screwdriver
- power drill
- level (optional)
Note: Maximum recommended load is 20 pounds
- Mark desired hole location on wall with pencil then drill hole locations.
- Use a #2 Phillips screwdriver to install the wall anchors at hole locations.
- Place fixture over wall anchor and insert screw with #2 Phillips screwdriver.
Tighten Agenda Magnetic Board into place.
Note: Screw self-threads into anchor. Do not overtighten.