Accessibility Statement Skip Navigation
Buy now, pay later with

Ideas & Advice

Trace Picture Ledge or Shelf Installation Instructions

List of parts:

  • Trace Picture Ledge or Shelf
  • wall anchors
  • screws

Tools needed:

  • #2 Phillips screwdriver
  • power drill
  • level (optional)

Note: Maximum recommended load is 20 pounds.

Directions:

  1. Mark, then drill hole locations.
  2. Use a #2 Phillips screwdriver to install the wall anchors into the holes.
  3. Place fixture over wall anchors and insert screws with #2 Phillips screwdriver.
  4. Tighten fixture in place. Note: Screws self-thread into anchors. Do not overtighten.
Trace Picture Ledge or Shelf Installation Instructions